<
Back to Electric projector screens page
|
Da-Lite Tensioned Contour Electrol electric screen |

Da-Lite projection screens
Da-lite Tensioned Contour Electrol electric screen
The Da-Lite Tensioned Contour is a high quality electric projector screen that features a tab tensioning system to provide an optimum flat viewing surface.
The Tensioned Contour ha s a stylish curved aluminum extruded case available in either black, white or graphite finish. An optional choice of seven veneer finishes are also available for the front cover of the screen case for a warm, elegant look.
The Tensioned Contour has some new features for 2013, including intergrated low voltage control as standard,a silent drive motor system and "new" Silm-tab tabs with a lower profiles design, these tabs are strong than all previous versions.
The tab tensioning system on the tensioned contour maintains even lateral tension to hold surface flat while custom slat bar with added weight maintains vertical tension
Da-Lite Tensioned Contour Electrol electric screens: codes and prices (ex vat) |
Aspect Ratio |
Viewing Size
H x W (") |
Viewing Size
H x W (cm) |
Diagonal
Size |
Da-Mat
|
High Contrast
Da-Mat |
Cinema Vision |
|
4:3 |
43" x 57" |
109 x 145 |
72" |
88471LS / £ |
88472LS / £ |
88474LS / £ |
|
4:3 |
50" x 67" |
127 x 170 |
84" |
88478LS / £ |
88479LS / £ |
88481LS / £ |
|
4:3 |
60" x 80" |
152 x 203 |
100" |
88485LS / £ |
88486LS / £ |
88488LS / £ |
|
4:3 |
69" x 92" |
175 x 234 |
120" |
88492LS / £ |
88493LS / £ |
88495LS / £ |
|
4:3 |
87" x 116" |
221 x 295 |
150" |
88499LS / £ |
88500LS / £ |
88502LS / £ |
|
4:3 |
108" x 144" |
274 x 336 |
180" |
88505LS / £ |
88506LS / £ |
88508LS / £ |
|
4:3 |
120" x 160" |
305 x 406 |
200" |
88511LS / £ |
88512LS / £ |
88514LS / £ |
|
|
|
|
|
|
|
|
|
16:9 |
45" x 80" |
114 x 203 |
92" |
88517LS / £ |
88518LS / £ |
88520LS / £ |
|
16:9 |
52" x 90" |
132 x 234 |
106" |
88524LS / £ |
88525LS / £ |
88527LS / £ |
|
16:9 |
54" x 96" |
137 x 244 |
110" |
94210LS / £ |
94211LS / £ |
94213LS / £ |
|
16:9 |
58" x 104" |
147 x 264 |
119" |
88531LS / £ |
88532LS / £ |
88534LS / £ |
|
16:9 |
65" x 116" |
165 x 295 |
133" |
88538LS / £ |
88539LS / £ |
88541LS / £ |
|
16:9 |
78" x 139" |
198 x 353 |
159" |
88545L / £ |
88546L / £ |
88548L / £ |
|
16:9 |
90"x 160" |
229 x 406 |
184" |
35169L / £ |
35170L / £ |
35172L / £ |
|
|
|
|
|
|
|
|
|
16:10 |
50" x 80" |
127 x 203 |
94" |
37582LS / £ |
37853LS / £ |
37585LS / £ |
|
16:10 |
57.5" x 92" |
146 x 234 |
109" |
70161LS / £ |
70162LS / £ |
70164LS / £ |
|
16:10 |
60" x 96" |
152 x 244 |
113" |
37592LS / £ |
37593LS / £ |
37595LS / £ |
|
16:10 |
65" x 104" |
165 x 264 |
123" |
20867LS / £ |
20868LS / £ |
20870LS / £ |
|
16:10 |
69" x 110" |
175 x 279 |
130" |
37602LS / £ |
37603LS / £ |
37605LS / £ |
|
16:10 |
72.5" x 116 |
184 x 295 |
137" |
70171LS / £ |
70172LS / £ |
70174LS / £ |
|
16:10 |
87" x 139" |
221 x 353 |
164" |
37612L / £ |
37613L / £ |
37615L / £ |
|
16:10 |
100" x 160" |
254 x 406 |
189" |
70181L / £ |
70182L / £ |
70184L / £ |
|
|
|
|
|
|
|
|
|
|
Square aspect ratios are available contact for details.
All prices shown excluding vat and delivery (£10 exc vat)
All items are ordered on request, delivery time approx. 7-10 working days.
|
Da-Lite Tensioned Contour Electrol screens are available with the following projection materials.
Da-Mat - front projection surface |
|
Da-Mat is a unity gain vinyl surface with a smoother surface than Matte White. It features a white surface for good color reproduction for environments with controllable ambient light.
Gain 1.0
Half Angle 60 degrees
|
|
|
High Contrast Da-Mat - front projection surface |
|
High Contrast Da-Mat® is a vinyl surface that features a dark gray base for deeper reproductions of black, which improves the perception of contrast. Best in environments with a high output projector and completely controlled ambient light. Seamless in any width up to 16' in height.
Gain 0.8
Half Angle 45 degrees
|
|
|
Cinema Vision - front projection material |
|
Cinema Vision is designed to provide a higher amount of brightness for lower output projectors. Its increased reflectivity enhances brightness in situations where a moderate level of ambient light is present.
Gain 1.3
Half Angle 45 degrees
|
|
|
High Contrast Cinema Vision - front projection material |
|
High Contrast Cinema Vision features a gray base for deeper reproductions of black, which improves contrast, and an increased reflectivity to enhance brightness for moderate ambient light. Ideal for video images. Seamless in any width up to 16' in height.
Gain 1.1
Half Angle 50 degrees
|
|
|
Pearlescent - front projection material |
|
Pearlescent offers a higher amount of reflectivity than Da-Mat, and is designed for use in applications where moderate viewing angles are required. This surface is a good choice when producing video images with a lower output projector or where there is a high amount of ambient light present. Seamless in any width up to 16' in height.
Gain 1.5
Half Angle 40 degrees
|
|
|
Video Spectra 1.5 - front projection material |
|
Video Spectra 1.5 is a fiberglass surface with a reflective coating for lower output non high-definition projectors. It offers increased brightness with a reduced viewing angle. Suitable for uncontrolled ambient light. Available in any width up to 8' in height.
Gain 1.5
Half Angle 35 degrees
|
|
|
Da-Tex - rear projection material |
|
Da-Tex is a vinyl, gray, rear projection surface that works well in high ambient light with a reduced viewing angle. It offers high transmission and low reflective values for optimal viewing. It yields excellent color rendition and image contrast. Seamless in any width up to 16' in height.
Gain 1.3
Half Angle 30 degrees
|
|
|
Dual Vision projection material |
|
Dual Vision is a flexible vinyl surface ideal for rear projection, but capable of both front and rear projection. Dual Vision is ideal for video projection under controlled ambient light conditions. With an exceptionally wide viewing cone and light gray tint, a sharp image with no color shift is observed regardless of location in the room. Seamless in any width up to 16' in height.
Gain 0.9
Half Angle 65 degrees
|
|
|
Audio Vision - perforated projection surface |
|
Audio Vision is a unity gain, perforated vinyl surface that allows for the installation of speakers behind the surface, and offers good color reproduction in environments with controllable ambient light. Available in any width up to 8' in height.
Gain 1.0
Half Angle 60 degrees
|
|
|
High Contrast Audio Vision - perforated projection surface |
|
High Contrast Audio Vision is a perforated vinyl surface that allows for the installation of speakers behind the surface. Designed for high-output projectors, it features a dark gray base for deeper reproductions of black, which improves the perception of contrast. This surface is best in environments with controllable ambient light. Available in any width up to 8' in height.
Gain 0.8
Half Angle 45 degrees
|
|
|
High Contrast Cinema Perf - perforated projection material |
|
High Contrast Cinema Perf is a perforated vinyl surface that allows for the installation of speakers behind the surface. It features a gray base for deeper reproductions of black, which improves contrast, and an increased reflectivity to enhance brightness where a moderate level of ambient light is present. Ideal for video images. Available in any width up to 8' in height.
Gain 0.8
Half Angle 45 degrees
|
|
|
HD Progessive 0.6 - front projection material |
|
Ideal for high output projectors or applications where projector brightness and screen size require low gain, the gray surface compensates for a brightly lit environment so that image contrast is preserved. In Low ambient light, HD Progressive 0.6 provides deep contrast for a rich enhanced image, and is typically used with video. Seamless in any width up to 16' in height.
Gain 0.6
Half Angle 85 degrees
|
|
|
HD Progessive 0.9 - front projection material |
|
Ideal for moderate to high output projectors, the light gray surface achieves a perfect balance between color reproduction and image contrast. Seamless in any width up to 16' in height.
Gain 0.9
Half Angle 85 degrees
|
|
|
HD Progessive 1.1 - front projection material |
|
Ideal for applications where projector brightness and screen size require an increase in gain, the white surface offers true color reproduction and fidelity. Seamless in any width up to 16' in height.
HD Progressive 1.1 can be cleaned with mild soap and water, is flame retardant and mildew resistant.
Gain 1.1
Half Angle 85 degrees
|
|
|
|